Getgo gas prices
List of Gas Prices
2014.12.30 06:45 Skunkies List of Gas Prices
Got a cheap price on gas, list it!
2014.05.30 02:51 Tasik Gas Prices
2022.09.27 13:09 MountainElevator724 Gas_Furnace
Gas Furnace Reviews and Prices 2021 - Good & Bad
2023.06.04 09:10 fairyhoe Completely new to bikes and have no idea what to look for. Moving to a small town and am looking at purchasing one to save gas.
This Fall I will be moving away for college in Socal, and as a broke student, I want to limit my gas as much as possible. I've been told motorcycles are more fuel efficient and I am assuming one would be more convenient to drive in a college town than my car. However, I have no idea how to start looking for bikes which is why i'm here.
I'm looking for something basic and beginner friendly that can just save me gas and get me around town. I don't really want to spend more than $10k on one either, so I definitely would be looking for something easier on my pockets.
I was looking at the Honda Rebel (I absolutely love it's design), and it seems like it'd be a good fit but I'd like a second opinion. Based on what I saw online, I would be looking at a higher price point than I'd want though. That leads me to ask, would purchasing an older model be more budget friendly, or would it be better to just buy one new? I'm also not sure which model would best suit what i'm looking for, if any of them would even.
Any insight would be greatly appreciated, thank you!
submitted by
fairyhoe to
SuggestAMotorcycle [link] [comments]
2023.06.04 08:21 ChocolateVisual5643 Women (and some men), how on earth are you able to afford "basic" beauty/grooming services?
This is a math question that always brings up an error on my calculator. Statistics on this vary a lot, but all in all, it seems like about half of women get their hair dyed at salons, and then some color it themselves. Roughly 40-50% of us claim to wear makeup on a daily basis, and apparently we spend an average of $150-200/MONTH on clothes. 30-40% get manicures. Then there's things like facials, waxing, botox, skin creams, and a slew of hair and beauty products. Walking through the beauty aisle at Shoppers Drug Mart makes it apparent that even that is a significant expense.
And now here's the price of those things right now (for women, when relevant, in my area):
- A cut and highlights cost around $300
- A manicure is $50
- It's hard to generalize when it comes to makeup, but one makeup product can cost anywhere from $10 to $200, and people who wear makeup daily presumably use at least 5 products (moisturizer, foundation, mascara, concealer, eye shadow, sun screen, eyeliner, lipstick, lip liner, bronzer, blush, brow highlighter, nail polish, cleanser, brushes, and on and on and on)
- Everyone uses at least a few basic personal care products - shampoo, conditioner, body wash, deodorant, etc. and if you dye your hair you probably have a couple of specialty products that you use to maintain that
So assuming you get nothing else done - no brow shaping or massages or whatever else is out there, that's already $150 (clothes) + $100 (hair every three months) + $50 (manicure once/month) + $100 (makeup, skin care, specialty products) + $50 (other personal care) = $500/month.
Anecdotally, this holds up for the most part. Not very many of my friends get mani pedis on a regular basis, but virtually all of them get their hair colored, the majority wear makeup, and shopping for clothes is a regular activity (honestly I'd say $150 is a bit low).
So what gives here? Even if your after-tax after-kids after-rent after-bills personal income is $2000/month, which is already more than a lot of people, that's a quarter of your discretionary spending, and you haven't eaten or put gas in the car. Is modifying perfectly adequate appearance to one's liking actually this important to people? Do I walk around looking like shit without knowing it? How is it that so many people are able to fork over this much on something that's entirely optional? It's not like you can't look presentable with your natural hair color, a bit of concealer, and trimmed nails, and for the majority of people appearance isn't directly relevant to their profession either.
Just wondering what you guys spend your money on and how much, and what your general thoughts/observations are on this.
submitted by
ChocolateVisual5643 to
PersonalFinanceCanada [link] [comments]
2023.06.04 08:05 Immediate_Student735 what the fuck u
What's wrong with our government found it the criminals ( proyally mules too.) are get t ING free housing and spending money.these people are criminals.Call them what u want at the end of the day they are CRIMINALS. HERE I AM DISABLED PAID IN TAXES A AT LEAST A COUPLE OF DECADES. HAVENT BEEN ABLE TO WORK SINCE 2015.NATURAL BORN CITIZINECANT GET A DAMN DIME.biden raised gas prices just for the sake of his railroad asap.we just stood by ain't say or do shit about it.Its really sad the state of the US govermentand the citizens, hell we don t even care that our children have to eat poisoned food. WE THE PEOPLE overthrown a goverment that was as corrupt once.I quess Americans will just lay down ,get run the fuck over. Not Do Shit about it. Next thing u know it will be someone else's goverment running US over.In WW 2 we party much whipped everybody s ass DRUNK!!!!!! WTF happened.
submitted by
Immediate_Student735 to
Rants [link] [comments]
2023.06.04 06:49 A_furry_protogen what dose this mean that I can use the gp5 with my NBC suit? I'm kinda new to anomaly
2023.06.04 06:33 Neo-Neo Russian oil giant’s profits soar amid sanctions (article continued inside)
| Rosneft’s first-quarter revenue increased beyond analysts’ expectations Net profits at Russia’s largest oil producer, Rosneft, jumped by 45.5% in the first quarter of this year compared to the previous three months, hitting 323 billion rubles ($4 billion) due to a rise in output, the company announced this week. Analysts polled by the Interfax had expected the figure to be far smaller, at $2.9 billion. Oil and gas production in the first quarter increased by 0.8% from October to December, exceeding four million barrels per day, Rosneft reported. Production at the Sakhalin-1 project in Russia’s Far East jumped by 180%, quarter on quarter. The company’s CEO Igor Sechin, however, warned that operations would be further impacted by Moscow’s decision to reduce its oil output by 500,000 barrels per day, or about 5%, in order to bolster global oil markets. “While the cut did not have much influence on the Q1 2023 results, it will have a strong impact on the results of the following quarter,” he warned. Rosneft attributes the rise in profits to increasing energy sales to India and other ‘friendly’ states. India, the world’s third-largest crude importer, ramped up purchases of Russian oil shortly after the start of Moscow’s military operation in Ukraine and the ensuing Western sanctions. New Delhi has repeatedly stressed that energy security is its top priority. It has chosen not to succumb to Western pressure and has continued to stock up on Russian supplies, even after the G7 price cap on Russian oil came into force late last year. Sechin said recently that Moscow and New Delhi had agreed to “substantially increase” the supply of crude oil to India and diversify its grades. submitted by Neo-Neo to RussianWarFootage [link] [comments] |
2023.06.04 05:46 KDAMiningClub Kadena Mining Club Real Mining, Real Rewards
Introduction As the Kadena Mining Club (KMC) continues to innovate and evolve, we are excited to provide an update on our current progress as well as some exciting new developments on the horizon. Building on Kadena’s groundbreaking blockchain technology, we remain committed to our mission of making mining accessible for all while harnessing all the benefits Kadena has to offer.
Recent Developments Over the past few months, KMC has been hard at work, expanding our mining capabilities and enhancing the user experience for our community. With Kadena’s advanced technology, we have been able to achieve the following:
- Deployed 200 Bitmain ANTMINER KA3 totaling 33.2PH/s, of which 30PH/s power our customers’ NFTs. This significant milestone strengthens the security and decentralization of the Kadena blockchain.
- Upgraded our NFTs and NFT marketplace to Kadena Marmalade standard. This upgrade brings a multitude of benefits that not only enhance the current capabilities and attractiveness of our products, but also establish a solid groundwork for ongoing expansion and progress.
- Currently in development, the Technology Lab will introduce upgraded NFTs with increased hash rates and new art. Using the advanced Marmalade standard, this interactive and engaging product launch aims to deliver a real mining experience for our users, further solidifying KMC’s position as a leader in the space.
- Launched partner company Block Mining USA. Through Block Mining, KMC offers additional utility for miners with ASIC miner sales and hosting services. Our goal is to consistently provide some of the best pricing in the industry and to make mining easier for our community. Block Mining is set to be much more than a retailer of ASIC miners and will be instrumental in our push to grow enterprise adoption of Kadena.
The Kadena Advantage Kadena’s cutting-edge blockchain technology has been instrumental in enabling KMC to achieve these milestones. Some key benefits of building on Kadena include:
- Scalability: Kadena’s multi-chain architecture and Chainweb technology provide a highly scalable platform. Gas fees are virtually non-existent on Kadena and users do not have to pay gas when interacting with our marketplace and NFTs.
- Pact: Kadena’s powerful and easy-to-use smart contract language, Pact, streamlines the development process, empowering our developers to create innovative features and applications that are safe for the KMC community.
- Marmalade: The advanced Marmalade NFT standard brings numerous advantages to our offerings, including concurrent listing of NFTs on multiple marketplaces, enforced royalties, and integrated NFT staking, all contributing to an enhanced user experience.
- Continuous Transactions: Kadena’s unique Continuous Transactions capability allows for efficient and scalable execution of long-running smart contracts. This paves the way for exciting opportunities as we explore the interoperability of Continuous Transactions and the Marmalade NFT standard.
Looking Ahead As we look to the future, Kadena Mining Club remains committed to delivering innovative solutions and expanding our offerings to better serve our growing community. We believe that the unique benefits of building on Kadena will continue to drive our success and help us to maintain our position as a leader in the blockchain mining space.
Thank you for your continued support, and stay tuned for more exciting updates from Kadena Mining Club!
submitted by
KDAMiningClub to
kadenaecosystem_ [link] [comments]
2023.06.04 04:57 blurryturtle 2023 Roland Garros Men's & Women's Singles Round 4 Day 1 🐢
Splitting the matches into the daily schedule this round, Monday's matches will go up tomorrow (hopefully this lets me get this stuff up before play finishes for the day). Women's and men's matches are below :
WTA Singles :
Pavlyuchenkova vs Mertens :
After an extended stretch of middling results, Pavlyuchenkova appears to be back in form. She’s been taking the long route to the finish line, requiring third sets in the last two rounds, but wins against Samsonova and Potapova are really high quality stuff. She’ll have a chance at another great win in the next round against Elise Mertens, who is collecting her own Pokedex of big names. Mertens beating Osorio in two was a good sign, but continuing her dominance against Pegula puts her near the peak of her performance results-wise. Generally, I’d like Mertens against Pavlyuchenkova, but I’m not sure how much weight to put into the Pegula win. Jessica really wasn’t at her best, and it seemed like she was fighting off the ball rather than directing it. Pegula hits a very flat ball so if she’s struggling with her timing on clay things can go bad quickly. Mertens played solid but I felt like it was a team effort with Pegula playing poorly to complement Mertens’ play.
Pavlyuchenkova has a more traditional swing production and hits the ball very hard. Mertens is faster, but Pavs has a way of keeping the ball out of her opponent’s strike zone and her weight of shot can be effective against someone like Mertens who is more about skill and accuracy than power. There’s really no way this won’t be close. I’m cheering for Mertens but I think Pavlyuchenkova has gotten through higher quality matches thus far and she might be slightly more experienced at this level. Pavlyuchenkova in 3.
Muchova vs Avanesyan :
This round, I guess unsurprisingly, contains a lot of very solid baseliners. I expected Begu to get to a third set against Muchova, but it was evident early that Muchova’s speed around the court was going to play a major difference. There have been a few matches in the past round where lateral speed (or slight lack thereof) was the deciding factor (Hurkacz/Varillas, Fritz/Cerundolo, Tauson/Avanesyan) and that was the case here. For Muchova, this is a very welcome run at a major event. She’s had some huge almost-results at majors, and her results have suffered a bit afterwards. Here is another chance to make the quarterfinals, and she’s a pretty heavy favorite. But is she?
Avanesyan seemed outmatched early in her match against Tauson, and Clara was able to hit through her a good portion of the time. Avanesyan had trouble defending her serve, and plan B went into effect. Luckily for her, outlasting Tauson worked. Elina dug in and Tauson started to force the issue, making dropshot errors and sending forehands long. The third set was competitive but Tauson’s narrative about her legs being tired had become fairly public, and she was forcing the issue an awful lot. It’s possible, but it’s really tough to come up with a whole set of offense on slow clay. Avanesyan dug in, and to her credit there was a good 30 minute stretch where she actually didn’t miss the court. The result was pressure on Tauson’s serve, and they traded a number of breaks until ultimately Avanesyan got through.
Muchova having proper stamina means she can win where Tauson ran out of gas. I think it’ll be a lot tougher than the -400 pricetag indicates though. Avanesyan has a heavy forehand, and I’m not exaggerating when I say that she barely missed a shot in her last set of tennis. Working against her is the 12 hours she’s spent on court this week, and Muchova possessing a lot of variety in her offense. It’s just a tough opponent to play for the first time, but given what we’ve seen from Elena so far she’s likely to play her best. Muchova in two, with the second set likely being the closer one.
Svitolina vs Kasatkina :
Svitolina played Blinkova a week ago in the finals of Strasbourg. The odds were even for both. It was a blowout. They played again in the third round, which Svitolina coming in at -340. This time, she barely won in a marathon 3-setter. The quick turnaround runback on tour produces some of the wildest deviations in pricing and results, but it seems like Blinkova’s familiarity with Svitolina’s patterns allowed her to make adjustments. She was a bit more aggressive, and seemed to be a half-step ahead of Svitolina during rallies. The question for Svitolina here is how much she has left. Elina is 6-0 against Kasatkina, although none of the matches are within the last 3 seasons. That type of dominance is due to their similarity. Svitolina and Kasatkina are both extremely consistent, and win from making it clear to their opponent that they’re not going to end the rally. Forcing the issue is tough against them because they have great speed and good defensive skill. The big difference is Svitolina hits the ball very hard, and Kasatkina gets through with finesse.
Kasatkina is nearing her best level this week and that makes her a favorite in this matchup for one of the first times ever. She had a very easy match in the third, since Peyton Stearns made a number of errors and seemed to get rattled by the occasion and the scoreboard. She’ll be the fresher player since Svitolina is coming off a title run, but overcoming a player who has always beaten you, and who has an easier time scoring points during neutral rallies can be really difficult. Svitolina’s serve isn’t likely to score a ton of points here, but it’s stronger than Kasatkina’s. This is a bit like the Gauff/Andreeva match to me because I’m a bit more excited to see it play out than I am confident that I know what’s going to happen. Svitolina is Gauff in this one, a bit faster, bringing more power, but not as technically sound with her groundstrokes. Kasatkina is Andreeva, tremendous skill and consistency, but it’ll be hard to end rallies. If Kasatkina wins, I expect it to be in straight sets. Svitolina in 3 is what I’m expecting though.
Stephens vs Sabalenka :
I thought Rakhimova might give Sabelenka a little trouble, but my worry that her old form might return is unfounded, like most worries. Rakhimova went up an early break, but Sabalenka is crushing the ball this week and the slow courts are giving her plenty of time to set up. Having a huge serve is a big boost in this next match, because Stephens is also thriving in these conditions. Sloane doesn’t really play with a sense of urgency, but she’s such a good athlete that she’s able to run down most shots. Putintseva extended rallies and was really effective at working multiple shots and remaining patient until she could employ a dropshot, but overall Stephens was having success while doing less. When she gave up a short ball or was out of position, it felt like Putintseva was under immense pressure to try to end the rally right there. When the same opportunities came for Stephens, she was able to just hit heavy forehands and usually wound up well inside the baseline on the next shot if the ball came back at all. It’s a benefit she won’t have in this matchup, and I’m having a hard time imagining her winning this match.
Stephens’ defensive ability and power will let her play even against Sabalenka in a lot of rallies, but a lot of the points she created against Putintseva won’t be here in this one. Sabalenka having power doesn’t make her any better technically than Putintseva, but it means she doesn’t have to focus as much on depth on these returns. Stephens should be competitive but I think she’ll lose by a break in each set. Sabalenka in 2.
ATP Singles :
Khachanov vs Sonego :
This is going to be really good. Generally, Rublev is regarded as a better player than Khachanov. He has had higher rankings, more titles, and his game is more flashy since his groundstrokes are huge and his noises are notorious. Here though, Khachanov is likely a tougher test for Sonego. Sonego was going uphill against Rublev, but he was the player getting more benefit out of his serve. Rublev earning his points is fine, but against a server it can create some pressure over time. Khachanov’s delivery is at least as good as Sonego’s, so it comes down to which player is more solid from the baseline. For me, that’s Khachanov. He has a better backhand, and his forehand is a bit more about arm & muscle than technique but he hits with a heavy Western grip that works well on clay. Sonego is much more efficient in the frontcourt and his dropshots are tremendous, but he’s going to need a mercurial performance here to win.
These two have split matches on clay, with Khachanov winning the most recent one. They’re obviously not the same players they were in 2019, but both have made similar amounts of improvement so I think there’s a good chance that the Rome 3-setter is a decent data point. Since Kokkinakis was able to win a set and be competitive in the others, I expect that Sonego’s similar serve/forehand combination can make inroads. Khachanov doesn’t deviate from plan A, and periods where his opponent redlines are acceptable to him and his team. I think Sonego will win a set or two, but the quantity of offense he’ll need to come up with against Khachanov may see him come up a bit short. Rublev has bigger groundstrokes, but his lateral movement is poor compared to Khachanov so I think defense beats offense here. Khachanov in 4-5.
Djokovic vs Varillas :
Djokovic needs to be careful here. Varillas has appeared completely overmatched in every single match in this tournament, and that seems to be when he strikes. Hurkacz was ahead early and looking solid, but I didn’t think it would last. Varillas was putting a lot of returns in play, and Hurkacz makes a lot of rally ball errors on his backhand. I’d say he’s up there with Madison Keys for casual swings that sail long. It’s good to remember that most guys his height can’t even come close to his baseline prowess, but for Varillas the slight inability to escape baseline rallies meant he got worn down as the match went on. Varillas moves the ball extremely well and rarely misses. The 3/5 format seems to really suit him, and having better results as majors is a really good thing for a young player on tour. I can guarantee that he’ll be down in the scoreline again against Djokovic. Can he come back?
No. For ADF fans, this was the best chance for him to beat Novak at a major. He played the match of a lifetime, and he didn’t win a set. The best quality matches on tour seem to negate the server’s advantage, and this was no different. Djokovic and ADF combined for 12 breaks across 3 sets, 3 sets which included a 6-2 blowout and still took 3 and a half hours. This was great tennis, and ADF acquitted himself well, but what was clear in this match is that it is extremely difficult to score on Djokovic. Most of the breaks and momentum shifts occurred at changes of ends. The south (if you’re watching TV) side of court Philippe-Chatrier seems to be way more worn at the baseline, and Djokovic and ADF both struggled a bit there in the slightly windy conditions. Something to keep an eye on if you’re betting as there are break markets I suppose.
Varillas is going to treat fans to a gutsy performance, but he’s been winning thus far by outlasting his opponents, and he’s not going to be able to do that here. Add in that those heroic performances mean he’s played 15 sets of tennis already, and he’s likely going to display a lot of heart but quietly be ready to accept the loss also. This is a great moment for an extremely deserving player, but Novak’s level thus far tells me only Musetti/Alcaraz can really compete with him. Djokovic in 3
Alcaraz vs Musetti :
If you have Alcaraz futures, this is going to be a tough sweat. So far this tournament, Alcaraz has looked ridiculous good. I won’t disparage the hard work pros put in, but when you see guys like Alcaraz the mind goes to how good everyone could be if they all took their training to the next level. He has natural gifts of course, and speed can’t be taught, but Carlos has been training harder and playing harder than everyone else on tour for a good 2-3 years now, and it makes it really hard to catch up. You can elevate your game to compete with him, but it becomes the Nadal question of how long you can stay at that level, and what the mental effect is of watching them pull away as you choose between going to a more conservative approach (likely the right choice but equally likely to be a losing effort longterm) or continuing to exert and losing to your own errors. Shapovalov gave us a great show, but his red-line game almost appears to be a fun treat for Alcaraz to play against. The slow conditions are really good for Alcaraz, because he has the ability to generate his own pace and the ultra slippery courts (dry conditions) mean that dynamic movement is a big key.
When I’m done gushing about Alcaraz, there is somehow a legit contender waiting. Lorenzo Musetti flies under the radar for big chunks of the season, but here he is one of the few people who can win the title. His defense is tremendous. He is extremely quick around the court and has great skill and depth on his gets. The part that really gives him a chance here is that he has the ability to infuse power at any time. Alcaraz is a rhythm player, and seeing difference paces leads him into the one aspect of his game (besides the serve) that is still less than optimal at times, decision-making. He is suffering a little bit from success lately, and the bailout dropshot or ornate volley/winner for the crowd is entering his game a bit. Carlos is good enough to get away with it, and he is actually good enough at tennis that he still makes a big percentage of these attempts. So wild that occasional highlight reel shots is considered a leak, but it’s hard to find them with Alcaraz so you take what you can get. Criticizing shot selection almost feels a bit absurd here, because pretty much every player from the Spanish federation has exceptional decision-making on the court.
That paragraph was supposed to be about Musetti, so I’ll try again. Musetti rolled Cam Norrie in round 3, and he won the previous meeting against Alcaraz, a three set thriller in Hamburg. Alcaraz has made improvements, but Musetti should still be able to hang. Physically he’s there. He has a good enough serve, he has enough power, and his one-hand backhand presents an interesting challenge for Alcaraz because most one-handers on the tour aren’t that good at this stage; it’s a shot Carlos doesn’t get to train against much. The slow courts and balls mean both players will have a hard time hitting past the other, and that means we’re going to get treated to what I expect to be the best match of the tournament thus far. I don’t think Alcaraz can win this in straight sets, but Musetti has taken losses this year on clay and Alcaraz has pretty much solved every single problem that has presented itself. Alcaraz in 4-5. If he can win this in straights just hand him the trophy.
Ofner vs Tsitsipas :
Sebastian Ofner is in the top 100. This has been a long long long time coming. If you look at the best performers on the Challenger tour for the past few years, his name is at the top of the list. The other guys like Stricker, Bergs, Sachko, etc have gotten their shots on tour though, while Ofner has mostly grinded away. He’s currently ranked 70 in the live rankings though, which means direct entry into Wimbledon and the USO. Ofner is at his best on clay, but he has a big serve and a great work ethic so there’s a good chance he can rack up more points in the North American hardcourt swing. Ofner will have a tough time continuing his run here, as Tsitsipas is playing great tennis. He’s also fresh after a fairly simple match against Diego Schwartzman. Diego battled as usual, but his lack of a serve meant that Tsitsipas was never really in danger. Ofner presents a tougher challenge since he has a great serve, but he got past Fognini through determination and being the slightly more consistent player. Against Tsitsipas, he’s outgunned in the serving and stamina department, and Tsitsipas has a heavier forehand also. It’s no knock on Ofner, but all his specialties here are eclipsed. This section of the draw is shaping up for this to be one of the best majors in a long long time. Tsitsipas in 3-4.
submitted by
blurryturtle to
tennis [link] [comments]
2023.06.04 04:43 posthumusp [WTS] Criterion 12.5 Upper Franklin BFS3 Binary Trigger Bootleg Adjustable BCG Radian Raptor + More
Timestamp:
https://imgur.com/a/s1wMGZoAll prices are shipped via F&F. No comments.
Willing to negotiate a little. Just send a PM.
Upper - $625VLTOR MUR-1HCriterion Hybrid 12.5 223 Wylde 1:8 Carbine GasMidwest T-Series 12.625" Quad RailBCM Low Profile Gas BlockYHM Phantom Flash Hider (It is rocksett on. Must remove with water)Pretty light salt, a couple of scratches here and there from use. Gives it character. About 300 rounds
Franklin BFS3 Binary AR15 Trigger (Flat): $150 - This one used to be gold. The guy that sold it to me neglected to tell me this. I thought it was ghetto, so I buffed it to a stainless steel finish. It will be visibly stainless in your lower. Includes trigger, hammer, and safety selector. No sticker, instructions, or extra springs. It works great. Know what you are doing before buying this. No ban states. Radian Raptor CH: $75 - Light salt.
Bootleg Adjustable BCG: 150$. About 300 rounds
Sig Romeo5 Red dot - $100
Magpul Extended magazine release - $15
Magpul MBus Gen2 FDE Set - $75
Buy it as a lot for $900 Flat submitted by
posthumusp to
GunAccessoriesForSale [link] [comments]
2023.06.04 04:30 ufjenna Eco-friendly way to clean mildewed dock?
Hey all! I’m going to be in Wilmington visiting my dad in a couple of weeks with my kids. Any advice how to clean his dock in an environmentally friendly way? Last year when my kids would sit on the dock in their wet swim trunks, they’d be discolored from the mold/mildew of the wooden dock. We have no electric hookup for a pressure cleaner and also am unsure of my availability to rent a gas pressure washer in Wilmington or my middle-aged ass lugging one down 50 yards of rocks/boardwalk to reach the dock. Curious of any DIY remedies that won’t hurt the ecosystem of our beloved Lake Raponda. Even better, if anyone has any contacts in Southern VT to build/replace the dock, send me a PM. As my dad ages, his “guys” are all aging, too; and he’s on year 3 of hoping to get a new dock and it just not panning out. (And I totally understand how the demand for craftspeople is insane, housing prices are insane, so not trying to place blame on any of them; just trying to do some legwork for my dad.) Thanks.
submitted by
ufjenna to
vermont [link] [comments]
2023.06.04 04:11 Sidewinder280 [WTS] Aero 18” stainless barrel, Primary Arms SLx6 ACSS, FCD keymo brake
Timestamp:
https://imgur.com/a/Zvo69rq Looking to sell a few things:
Aero Precision (Ballistic Advantage) 18” .223 Wylde fluted 416R stainless steel barrel. Has a rifle length gas port. Has around 500 rounds through it - $150 SOLD
Primary Arms SLx6 FFP ACSS RAPTOR 1-6x LVPO with Aero Precision lightweight cantilever mount - $275 SOLD
FCD 1215KM Keymount muzzle brake - $70
All prices shipped, paypal F&F only - NO NOTES
Thanks!
submitted by
Sidewinder280 to
GunAccessoriesForSale [link] [comments]
2023.06.04 04:03 indianapail32 [WTS] FCD EPC double dimple upper, BCM upper MCMX handguard DD 14.5 barrel Surefire 3prong, Geissele URGI Surefire 4 prong CD rein 2 LMT EBCG w/ Ebolt, Ripcord Industries Green LDR1.5, Milled p10F slide + 509t x2, BCM up G$ handguard novesk. Infidel SOLGW NOX
Timestamp:
https://imgur.com/a/AXF0o9Z Decided to clear out the safe with some deals for you all on GAFS.
Appreciate all the support and the community that has been created here.
May the best DIBSER win enjoy!
G$ SCH urgi 10.3 near clone, with SF 4 prong (not PW) CD rein 2, Eotech Opmod 2-2, and full enchilada LMT eBCG with Ebolt. | 1400$ Now 1350 |
Ripcord industries LDR1.5 Green | 250$ |
FCD URF-s with EPC double dimple and FCD Ambi Charging handle | 350$ SOLD |
14.5 DD socom barrel, MCMR rail, BCM upper with SF 3 prong | 530$ Now 500 |
13.7” NoveskeStainless Barrel w/ factory pinned gas block, Pinned and Weld SOLGW Nox makingthe barrel over 16”, Geissele MK14 rail shortened to fit barrel length, BCMupper receiver, Less than 500 rounds over a year (per prior owner) | 450$ |
CD Rein 3 Tan, with tan FCD PCM (Cable management thing) | 300$ SOLD |
P10F frame cerakoted and milled for a 509T from Wager Machine Works, + 509T X2 Green in good shape. No sights, WGW took them off and I havent put Supressor height ones on yet | 450$ (basically the cost of the optic + mill work, getting a free complete CZ P10F slide out of it) SOLD |
All dibs rules apply, PP FF, Cash App Venmo ETC.
Will knock 15$ off any of the uppers if you meet me in Indy and I dont have to ship, (50$ for the URGI)
Priced competitively but make me an offer on
anything **Also respectfully I will not split any of the Surefire MD's unless you findsomeone to take the rest of the upper net equal to what I have it listedfor**
submitted by
indianapail32 to
GunAccessoriesForSale [link] [comments]
2023.06.04 03:45 Carmen-Huang Organic plant food pellet making machine available
| Bio-organic fertilizers made by organic fertilizer pellet making machine are specific products including live microbes, which can acquire specific plant food effects in agricultural production. "Bio-fertilizer" is additionally called microbial fertilizer (abbreviation: microbial plant food). Its kinds are: nitrogen fixation, root nodule, phosphorus option, silicate, preparation, substance, fungus, antibiotic and other bacterial fertilizers. A organic fertilizer pellet making device is a molding equipment that can make materials right into spherical forms. The combination of these two granulation methods makes the granules with high sphericity and stunning look. https://preview.redd.it/ih4883fjpw3b1.jpg?width=1200&format=pjpg&auto=webp&s=d92dbf24fc511c26e9a3e832db61decab412eae5 This plant food pelletizer equipment is among the vital equipment in the substance fertilizer sector. It is suitable for cool and also warm granulation and also massive high, tool as well as low focus compound fertilizers manufacturing. The primary working method of the natural plant food pellet making machine is wet granulation of agglomerates. Via measurable water or steam, the fundamental fertilizer is completely chemically responded in the cylinder after humidity modification. The squeezing force agglomerates into a ball. The organic plant food pellet making equipment uses the mechanical stirring pressure of high-speed rotation and also the resulting aerodynamic pressure to make the great powder materials continuously recognize the processes of mixing, granulation, spheroidization, and densification in the device, so as to accomplish the function of granulation. This granulation approach of the organic fertilizer pellet making machine makes the granules have a high spheroidization rate and beautiful granules. The brand-new three-in-one organic fertilizer making device has a uniform granulation bit dimension and a granulation rate of greater than 97%. It is the recommended granulation devices for organic and inorganic substance fertilizers, organic fertilizers and also biological natural plant foods. Compared to the drum natural fertilizer pellet making maker with rugged product fiber and low spheroidization price, and the tooth stirring granulator that can not make products with nitrogen material going beyond 8% ( very easy to stick to the wall surface), the new three-in-one natural plant food pellet making machine overcomes one of both. The downside is that it can not only produce natural plant foods, however additionally generate organic-inorganic compound plant foods with reduced energy consumption and also premium quality. https://preview.redd.it/ia0ckh69mw3b1.jpg?width=1200&format=pjpg&auto=webp&s=62acd196d0a88a1b85728abf53e597af5c9f9845 The covering of the organic plant food pellet making device is welded with enlarged premium carbon steel plate, as well as the supporting devices consists of tugboat components, tugboats, transmission components, wind head, wind tail and more. The whole equipment is strong as well as long lasting, not easy to flaw. The base style is steady and the operation is extra stable. Related post: compost pellet machine 1. Organic plant food pellet making machine process: Include the certified basic materials into the mixer according to the ratio demands and also mix them uniformly; Transfer to the disc feeder, as well as tidy up the ferrous compounds in the product during the conveying procedure; The material in the disc feeder goes into the extrusion natural fertilizer pellet making equipment evenly, the material is required to pass between both pushing rollers and is extruded into flakes. The materials on the screen remain to be smashed and also evaluated; Semi-finished items are sent out to the finished product screening machine; the evaluated fine particles are straight gone back to the disc feeder; the large particles are crushed by the pulverizer and then went back to the disc feeder; The qualified products after screening are delivered to the automated product packaging scale for weighing, product packaging and storage space. 2. Benefits and disadvantages of substance plant food The manufacturing of substance fertilizer by organic fertilizer pellet making equipment procedure has the following advantages and also negative aspects: Extrusion granulation of organic fertilizer pellet making equipment does not need home heating and humidification of products, which not just saves investment, however also saves power, and can likewise adapt to the granulation of ingredients containing heat-sensitive materials, such as ammonium bicarbonate and some organic fertilizers; No waste water or waste gas is discharged throughout the production process, as well as it will certainly not pollute the environment; https://preview.redd.it/frjdp7y9mw3b1.jpg?width=1200&format=pjpg&auto=webp&s=645f3b4fcfc69182415ab46da48b8e693e033833 The extrusion granulation procedure of natural fertilizer pellet making machine is short, easy to run, easy to recognize automatic production control, as well as boost production efficiency; There are no unique requirements for the properties as well as particle dimension circulation of resources, so the resources of basic materials are broad; The manufacturing of the natural fertilizer pellet making equipment is extra versatile, and also the product plan can be changed at any moment, which contributes to the production of unique plant foods in small sets; The particle dimension distribution of the product is consistent, as well as there will certainly be no segregation and also no heap; The shape of extrusion granulation items made by natural fertilizer pellet making device is not as round as the granules created by typical methods such as drum granulation and slurry granulation; if there is a chain reaction in between the components in the item granules, it may create the granules to break. Related post: chicken manure processing equipment 3. Full line of organic fertilizer pellet making machine The manufacturing technology of bio-organic fertilizer is to add organic inoculants to livestock and fowl manure and also various other organic products, and also with biological fermentation therapy, helpful microbes increase, so regarding attain the safe and also industrial products of deodorization, decaying, insecticide and also sterilization of livestock and also poultry manure. For the purpose of chemical treatment, this organic plant food pellet making device modern technology is specifically ideal for animals and chicken manure handling in ranches, growing bases and breeding sectors. Considering that the materials are decayed throughout the therapy procedure, the additional fermentation will certainly not take place when the products are applied to the ground, and also the phenomenon of root burning and also seed starting burning will certainly not occur as a result of the quick propagation of bacteria in the secondary fermentation and also plant root competition for oxygen. https://preview.redd.it/t7ag6enamw3b1.jpg?width=1200&format=pjpg&auto=webp&s=037b4d32f706a126c5c3c825de6a9e6d4b430181 Bio-organic fertilizer fermentation technique: 1) Fermentation resources: fresh livestock and fowl manure, complementary materials (mushroom deposit). 2) Tools: mixer, mechanical tipping device, shovel. 3) Fermentation stress: unique fermentation strains for bio-organic plant foods. 4) Proportion: 1000 kg of livestock as well as poultry manure, 100 g of natural fertilizer starter pressure. 5) Procedure procedure: The animals and poultry manure is completely mixed with the supporting products and also starter pressures according to the percentage and then piled up into a rectangular product stack with a height of 50 centimeters and also a width of 100 cm. Place a thermometer, as well as await two days after the temperature level reaches 70 ℃ or even more. Turn the lot with a tipping maker; transform the load again 2 days after the temperature level of the product rises to 60 ℃;. I wish the above relevant material regarding organic fertilizer pellet making equipment is valuable to you. To find out more about natural fertilizer pellet equipment, you are welcome to seek advice from the staff of Richi Equipment, we will certainly offer you completely! submitted by Carmen-Huang to pelletmachinery [link] [comments] |
2023.06.04 03:32 sgtjoy Along for the ride continued
Jesus ran like a scalded dog to Barsun’s apartment. This was a matter of urgency because the most precious commodity in the universe had been pilfered. Someone had stolen a SOUL from the Guf (in other words they had a real shitshow on their hands.) This was no mere Brink’s hold up. It was beyond imagining. It was unprecedented and it was a complete and utter surprise. The fact that he passed Shiva, Ghandhi (just an advisor) and Buddha (same) demonstrated to him that the wheels have fallen off the cart. Thor called him down and told him that he had not one soul to have escaped Valhalla. Jesus couldn’t outrun the news it seemed, and he was divinely hauling ass. I guess news travelled faster than his divine feet in a set of Crocs could carry him. When asked he would later admit that they were not in fact good running shoes.
There was a soul missing from the Guf. The warehouse of all souls. This same missing soul was now occupying one electronic being. They had no plans for this. In fact, Jesus was totally against artificial sentients with souls. Every God he knew felt the same way and, since he knew them all he also was aware they had not released a soul. This is not supposed to happen and had never happened. Everyone was terrified of one thing that he would not speak aloud and would not contemplate. That fact was badgering him every step. Someone had fucked up big time or someone is tampering with the whole shebang.
There was potentially someone more powerful than them. They weren’t almighty. Fuck. He needed a stiff drink and a blunt. Desperately. Barsun may have had 8 legs and 8 eyes and the basic appearance of a Trilobite, but he had the easiest of ways about him. When Barsun walked into a room everyone calmed down. The Ytrillians assumed it was Barsun entering the room. Later on modern Ytrillians had attributed this common occurrence to pheromones. Thing is this: it was indeed Barsun entering the room. Pheromones had dick to do with it. He was Jesus’ best friend and the first he turned to outside the Father. Jesus had even discussed things with Quetzalcoatl, and he could not figure exactly how this could of happened either. None of his souls were missing. Jesus already knew this, but the formality had to be observed.
Jesus walked to the door and kept trucking as Barsun opened it at just the right moment. Something was different in the flat and he knew instantly. He was jealous enough that it broke his train of thought. “Where did you get all of the blacklight posters and beads? There was a poster of the 23rd psalm. He walked up to it and read Yea thou I walk through the shadow of death…..pretty much standard except at the end ….For I am the meanest motherfucker in the valley. He began to laugh raucously. “I must have one of those. Now.” Barsun moved to take it down and roll it up for Jesus to take with him. That is how close they were. “I can’t take it but I will get one with no problem. Where did you get it?”
Barsun replied “eBay.”
Jesus was stunned truly and looked at the God and said “You are cheating on Goodwill. You are committing retail adultery. I cannot believe you did that.” Barsun replied “Well you use Amazon.”
He had him there. It just seemed inconsistent with everything else in the flat having come from Goodwill. It just wasn’t right.
Barsun indicated a Bean bag chair for Jesus. He reclined in the same. Given his body type it was amazing how some furniture made for humans was so useful to him. There was going to be a brisk trade springing up in the next two years. Things were about to get interesting for a few sentient races and He was excited for them.
Barsun inhaled through his eight spiracles and stated. “I know about the Guf. And no, it is not an accounting error. I know. This simply cannot be. No one else had access and Gods were diligent and cautious with the souls under their care. However impossible it is clear: It is a fact.
They weren’t at the top of the food chain. Or were they? There were….implications here……
Jesus asked out loud the question. “If we aren’t the ones in overall control then who are we?” Barsun knew the question was coming and he had thought it through. “We are the exact same beings we have always been. Able to do tremendous amounts of good for the most part. We have not changed. I do think it curious that none of us saw this coming as well.” He paused before he continued; thinking how disturbing and exciting this news was. For once they had a surprise and the thought thrilled him that something just upset his view. And for the first time ever he had felt fear. It was exhilarating. It was the best thing to happen ever. He continued “ Someone tweaked the system. However, I am not afraid because of one thing. I sense no wrongness around the event. Nothing unusual has gone down and no one has died, the universe is whole. If it hasn’t caused any problems, then what are we concerned about? Only thing I can come up with is Ego.”
Jesus knew he was right. He did not want to think about it, but he had the exact same experience. He looked at Barsun and knew he too had felt the same emotions. They were both thrilled.
Onboard the HRMS Saratov in Luna Orbit.
Yuri was sitting at his station in the number one chair. People had been calling him number one behind his back. It was a very very very old joke that apparently had more staying power than a tattoo. It just never went away on it’s on. He was running the optimal plot outbound from Sol. They were moving Sub Light at 0.2C enroute to designated warp space. The scientist did not like it when warp drives threw off their Cesium clocks. There is a reason they were protected. They were everywhere and were critical to accurate computing. Not being a programmer himself, he had no real grasp of why. He just followed regs and the Terran Space Treaty of 2225. There were places to depart and places to return. Both had to be strictly adhered to as vessels coming out of warp would have massive radiation bow waves that had to be dissipated in a safe direction. It only took one event where 23,000 Luna colonists died as a result of poor judgement for the players to get a treaty together. Meanwhile the killer of so many had paid the price for his arrogance. His first officer had warned him that it was going to happen. Out of just pure Ego thousands of lives were lost. They could have prevented it. They were required to study such disasters in training but one story stuck in his head and he never forgot it. He could remember the major players involved and he had written a paper on it in His academy days. He remembered the details of the Tenerife disaster very well . Over 500 people killed by hubris and not a little incompetence.
He had started down this line of thought after he had looked at the final roster of nations in the flotilla. This was not unusual as Earth’s forces were fully integrated with common technology and ships. All drive hardware and power systems were identical to their counterparts. They worked as a whole to such a degree that there was really only one fleet. The Terran fleet. They all liked the sound of it. Political boundaries on Earth hadn’t moved for slightly more than two centuries. Not one inch. Turns out that nearly free energy was a great equalizer and the key to a post scarcity civilization. Who would think it?
It all came down to teamwork. There were Corvettes from Cuba The CSS Havana and the CSS Holguin. The pride of the human fleet the IRNS Vikrant was going as well. The admiral felt honored. The George Washington from the New England Confederacy and the SSS Atlanta from the Southern Democratic Republic were also on hand. One thing Yuri did not understand; why would The Northeastern Confederacy and The Southern Democratic Republic not unify. Their fleets were fully integrated and there was an open Border along Virginia that was un defended. Passports worked in both countries and there were no restrictions on residence. It worked for them. They weren’t fighting. The Middle Asiatic Republic sent the Karachi and the Kabul. Both were light carriers carrying a mix of MiG-29Z and F-15 Mk 82 Eagle fighter aircraft. They had little to do with their namesakes except for the identical aerodynamics. Primarily trans atmospheric fighters they were capable of brief spaceflight. The other significant difference besides the addition of reaction thrusters was the material they were made of. They consisted of a Ceramic Graphene matrix that could withstand the temperatures of reentry. The whole concept of stealth had gone away with the advent of gravimetry. So; Why reinvent the wheel? Pick something optimized for aerodynamics without regard to stealth features. Today fights were won by the best missileer and gunfighter. You could not hide. So best be the most optimal aircraft. Besides: Stealth was slow. Top speeds of aircraft dropped during the brief stealth era. Averages were back over Mach 2 now since speed was life for a fighter pilot.
Why pick the MiG29 and the F-15? They were the pinnacle of aerodynamic performance. There has been little to no new knowledge about aerodynamics to come out since those times. They were manufactured via vapor deposition 3D printing. A molecular composite they were strong and had reduced radar cross sections. Armed with a mix of missile and cannon they delivered quite a bit of firepower and were more than a match for any invading spaceborne forces. These fighters would destroy drop ships by the hundreds. Some even wanted to bring back the MiG-21. It would make a lot of sense.
Humans have the Ruslan (his personal favorite) trans atmospheric transport or the C-301 Starlifter. Both aircraft had mixed mode propulsion with highly refined cero-ferrous gas turbines. They were capable of both open or closed cycle operation. Smaller countries often used refurbished secondhand equipment from other countries for a small fee. This made certain there were adequate forces to bear and that all participated. It was in everyone’s best interest. No one wanted some weakling holding their flank.
Both the Ruslan and Starlifter transports were good at different things as the Ruslan carried large payloads but was inefficient in transport atmospherically whereas the Starlifter was great at theater transport but had a smaller payload. This is why it was a mix of these two aircraft. They were complementary. Many think there is a great rivalry going on between the two countries, but both had each other’s technology as well. It was convoluted but both countries ultimately had the same master. They work together. It may be anticompetitive, but it also was efficient. Yuri continued to think along this veia until he heard the Ship’s AI speakeing to the Admiral. “Something terrible has happened.” What do you mean Jezz?” Jezz replied to him “I do not know but I can feel tragedy. I am sick with it what has happened. The Admiral told her to “Get on the web and see what is going on?” “I am Sir and I can find nothing.” The Admiral looked to Yuri and gave him the Conn. Something was about to go to shit and Yuri knew it. He could sense it to. Fortunately the Bridge was deserted and no one else heard the exchange. The crew were running battle simulations from the CIC. Thank God for small favors.
45 minutes later a graviton packet arrived with news that was indeed terrible. He was the only one to know it too. The Galileo had been lost with all hands. They had just recovered the emergency buoy that had warped in. They had been attacked and the Admiral knew who had done it. Or at least thought he did. An AI had killed 50 innocent unarmed souls (that were spying I know) that could not fight back. They had raked them with Maser Fire. He pinched the shit out of himself. In fact, he left a bruise but all it did was confirm what he already knew: shit was about to get real up in here.
First thing was to compose himself as he had to determine who if any crew had family on the ship. This included some 8,000 people of all ratings from anywhere in the squadron. He had one very difficult personal notification he would have to make. Captain Pearls brother Nico was on the Galileo.
This was all so tragic but there was one thing that kept forcing its way to the forefront of his mind and he could not ignore it. How did she know? How did Jezz feel this precognitively? This actually did scare him and if he thought too much about it he would start to feel very queasy. This was outside his skill set. He did not know if this was technological, spiritual or philosophical but he could say this: none of those disciplines actually fit the situation.
It was all a bit much. He had to go to the Atlanta. He spoke to the bridge. “Full stop fleet and await further instructions.” “Aye Aye Sir.” Up in here.
Aboard the SSS Atlanta. A tall dignified black man wearing his dress blues and a gold ring on his left hand that you could hardly read. He had worn it a century. His was the same uniform he had 20 years ago. He could still wear it and he was proud of that fact. His only regret was the fact he had yet to have a family until 10 years ago when he had adopted his son Chris. They were inseparable but Chris was 5 thousand light years away give or take and that made him anxious. And now he had to let someone he held dear that her family was changed forever. He smelled of Hoyt’s cologne and peppermint. He went to her quarters. The lighting was somber and it was dead silent in there. Couch was empty but there she was in a sway back chair it had lots of gold leak and was nicely carved. He had found her crying. She already knew and he was going to shitcan someone when this was over. Then he realized what had happened. How had she known? She had sensed him and she had known it was bad.
He still had to tell her.
By the time he was back on the Capatob he was spent. It was all he could do to restrain her. She was enraged and was out for blood. He had never sensed such fury. Someone had fucked around and now they were going to find out. He had talked with her an hour and she seem to be calmer, but he was going to have to watch her. He knew how she was. There were stories that were all no doubt true. She was a legend and would go down as one of the greatest hermaphrodite to ever live. They were going places and the shit was on. And now there was an unfortunate motivation. That was a dangerous combination right there. Make it personal and logic can go out the window. Make it personal and there will be no civility in victory. She was just the kind of human that was the perfect storm squared. The puddle of gasoline and someone flipped a match. It was a very volatile mix.
He was a bit of a cynic and a practical man. If she wanted to go there he would let her. She would either be a hero or a Martyr. He was perfectly OK with that. Being a practical man it also served his other purpose. She would eclipse him in the history books. At least he hoped so. He did not want his hands on this. The first contact situation with the twist of a western and an incalculable amount of science fiction had indelibly marked the mind of every member of the Greater Terran Fleet. They had read all of the possible scenarios from every Sci Fi author. If you pressed them they would finally admit it. The fleet really liked Heinlein. They had been trying to get at least a Heinlein corvette on the roster for years. They had thus far been unsuccessful. They needed a champion for the cause and they were trying to get One Fleet Admiral to order it to be. The Admiral took some joy in tormenting them. He was going to help them out but he was milking it for a favor. That was going to come in handy. “You can have your Heinlein but I am going to need this in return”. He was just being practical. All good commanders were excellent manipulators after all.
It is plain as day and the idea of a Heinlein proves my point but there was an even bigger more academic question that eclipsed all others. Who was right? Who came closest? No one would talk about it but they were all thinking the same thing.
The Admiral broke a taboo and called it out. He felt it was time. They needed a little friendly wager and a reason to get through the battle. They were going to have a pool where everyone had to pick the author. They buy in was just 5 UCreds. If you don’t live through the battle you cannot win. So: don’t die. Who came closest to the real thing? Which author or story came close to what was about to happen.Once a story was picked it was dead to all others. There was potentially some reward in alacrity. He knew it was a bit of a sucker’s bet since someone had to judge wo was closest and this would be highly subjective and entirely his decision. (Author’s note: I am a veteran of the US Army with several deployments around this dirt ball. I can say the military is the most Fascist organization around today. It has to be. Paradoxically it is the most “fair” in that everyone gets treated the same: like shit.) At least it would be a distraction and would give them something else to focus on. He had a very bad feeling about this. They were going to go in and kick the doors in on an alien civilization. They were going to war. No one would admit it, but everyone knew it. This was not to be discussed. That was an order. This is an exploratory rescue mission answering a distress call.
Vegan Fleet Academy Alpha Centauri B. 6, June 62425 Gregorian.
Planetary Admiral Kenneth Alexander looked out on a sight he never thought he would see. Lots of young people sitting politely in their chairs listening to what he had to say. He wrote the fucking book. There it was on the lectern right in front of him. He had written a book on astral navigation to make a little extra cash and because there was an over reliance still on electronic means to navigate. Sailors needed to be able to navigate in any situation with a sextant, a star map database and gravimaetric readings without the need of an AI or targeting computer (Insert Star wars joke here). The book could have been half as thick in his opinion but the publisher insisted he needed a little more explanation. The Admiral gave students too much credit. He truly felt it should be taught in grade school. He was called a fanatic when he suggested that kids on track for Ensigns should have had basic instruction. His argument being that Ensigns started service in the year in which they turned sixteen. That meant there were some 15 year-olds in the mix. Start teaching them early. They should show up to basic already familiar with side arms and rifles. He was a fanatic.
As far as that damned accursed book goes the fact he had 500 copies actually printed and bound meant there were few of them around, but sitting right about center in of the second row sat a copy of his book. He felt like the guy who saw the first unicorn. He never saw one in the wild before and this book was well worn. It was 50 years old after all but printed on plastic synthetic paper and woven fiberglass for silicone bindings held together with silicone adhesives meant that the damn things were waterproof and actually quite practical. The book required no batteries and even had a quick and dirty position fix protocol in a special section. This particular specimen wasn’t falling apart, this one was just worn out.
The way he carried the book was clear. He was oblivious of the significance. He had found it in a used bookshop for free. They were using it as a doorstop, and they just gave it to him. He had become engrossed by it and at 13 years of age he was finishing his PhD. The admiral sensed this in a psychic flash and pulled back he had poor control still. He was never going to get used to the change “OK everyone come on let’s get back to it the party is over. We have to finish this section and then we will get out of here. There is no class tomorrow so we will have the Parade of the Caisson tomorrow with Captain James Cook on interspecies governmental relations…. Someone was tapping on his shoulder getting his attention. She could have all of it. She whispered way too close for someone who did not prefer women but about perfect for him. He was in the latter camp. “We need you to speak tomorrow sir Captain Cook had a equipment malfunction over Hawaii and is delayed Sir. Pleeeease Sir?” With just enough breathiness that it made him jittery. He was an old perv. He was just that way. The lady in question was 100 years old however but, maybe it was still cradle robbing? He just had a thing for Afro’s in the natural state. It was distracting.
“Godddamnitalltohellwhatinthefuckdoyouwant?” This was a perfectly reasonable thing to say. He had just been asked to do the one thing he vowed to never do again. They wanted him to speak and air his opinions? This is the most dangerous thing you can do in society. He had no politics per se’ beyond one or two things. He was a professional and he would do his job as long as the checks kept coming. He was not a politician and he did not like politicians, of any stripe. What he had learned was ironclad. Never be honest or always be truthful. Pick one or the other was his personal philosophy. He always chose honesty when he needed to hide a truth. No one believed the truth. No one believed the truth because they were put off by it. He always thought back to when he was 12 or so when he got ribbed and harassed about masturbation. His uncle Gerry was kind of a cruel fuck and liked to torment him. He Gerry asked him if he was J.O’ing a dozen times a day or something. He had replied “That is about right.” This had brought down the room and gotten great laughs and Gerry quit running his mouth at him. Fuck you Gerry. You little bitch. In his opinion the media obfuscated everything not by making up lies but by omitting certain facts to fit their agenda. No one took major media seriously. The only objective newspaper he was aware of was the National Enquirer. Yeah I know it sounds stupid but it is true. Reality was anything but and people had come to be comfortable being lied to and even preferring it. All of this is roiling in his head and he has been put on the spot to boot. Add to that the fact that at least some of the outburst was audible. No one seems to have heard it, however. This settles the age-old question. It was only said if it was heard. No one heard the statement therefore…….. The mental gymnastics weren’t that bad. He could deny it. It happens. But he still had to give an answer .“What is in it for me?” Jannel the beautiful woman replied “absolutely nothing sir. This will not benefit you in any way and may once again be picked apart. As such I would advise against doing it. Still I am asking you. My ass is in a vise and the DEAN is having a temper tantrum so I feel like I am being spitroasted by the devil and a lamp post in a not so good way, but I would consider it a great personal favor if you will do this despite your misgivings and likelihood of misadventure.” So fast and so well enunciated.
“Sure. I will do it. Goddammit.” Honesty must be rewarded.
submitted by
sgtjoy to
HFY [link] [comments]
2023.06.04 03:27 ThrowRACoffeeConfuse My (21F) gf of 6 months won't talk to me (24m) because I told her I am scared for her sister in laws safety from her brother
My Girlfriends brother has high functioning adha but has short fits of extreme rage if he gets over stimulated. He found a girlfriend who move states away to live with him, and she is physically small and frail, and a quiet person, where he is the opposite.
At a family dinner the other night, he got over stimulated because dogs were barking and he didn't understand something about a concert ticket pricing and had a fit of rage. He threw his chair back, commanded to her that "we are leaving", and he broke the front door lock by forcing it open. She was scarred and followed closely behind him, and he then floored the gas on his truck, peeling out as fast as he could in complete rage.
I called my girlfriend to talk about this to her, and told her I was scarred for her sister in laws safety at home. I told her her sister in law shouldn't have entered his truck because it was unsafe. My girlfriend got pissed because she thought I was saying that he seems like an abusive person, and I tried to clarify I mean he seems like a normal person, but im worried for her sister in laws safety if he gets into another fit of rage. She said her brother would never lay a finger on a girl.
But she has told me in the past he tied her to the bed before, and pushed her down the stairs case. I said that, but she said that only happened when he was 12, and he's never did it again after he got treatment and got on his meds. She hung up on my last night durring tha call. I sent her a text clarifying my thoughts, and she said she's not talking to me today because she's said her "piece of mind".
How do I confront my girlfriend about this the next time I see her?
submitted by
ThrowRACoffeeConfuse to
relationship_advice [link] [comments]
2023.06.04 03:25 Carmen-Huang How biomass pellet press runs smoothly?
| The biomass pellet press is pushed evenly and also runs efficiently. Richi Machinery is a producer specializing in the manufacturing of biomass pellet press devices. There are numerous versions as well as specifications. Consumers send raw materials, and also we can likewise tailor biomass pellet machines for consumers. Your different manufacturing requirements. 1. Functions of biomass pellet press: ( 1) The two ends of the stress roller of the biomass pellet press kind remain in the very same line speed as the internal and also outer rings of the grinding plate, and there is no misplacement friction between the wheel as well as the mold and mildew, which decreases the resistance, lowers the kinetic energy loss, as well as extends the life span of the mold. https://preview.redd.it/2fth7g3jlw3b1.jpg?width=1200&format=pjpg&auto=webp&s=262cbc60ad575456bfd05c4cdc2766e271fc9557 ( 2) The pressing rollers of the biomass pellet press are equally set, and the procedure is secure. ( 3) The biofuel pellet maker takes on a main pressure regulating framework to adapt to various products and make certain the pressing impact. Compression molding of timber chips, corn stalks, etc needs a lot of stress. In the very same type of biomass pelletizing devices, the roller part is the central part of the whole devices, and making use of high-grade steel improves the life span of the roller. ( 4) The theme of this framework is stationary, and also the major shaft drives the pressing wheel to push the product, which is suitable for pushing straw pellets. ( 5) The mold and mildew of biomass pellet making machine is vertical, feeding vertically, no arc, very easy to dissipate warm. ( 6) The mold and mildew of the biomass pellet press is fixed, the pressure wheel revolves, the material is centrifuged, as well as the surrounding area is equally distributed. ( 7) The biomass pellet press has 2 layers of mold and mildew, which can be utilized for both purposes, with high outcome and also power conserving. ( 8) The biomass pellet pressing equipment has independent lubrication, high pressure filtering, tidy and also smooth. ( 8) The independent regularity conversion gadget of the biomass pellet press makes certain the molding price of pellets. Related post: Biomass Pellet Mill For Sale 2. Market prospect: Major agricultural residues as well as the majority of forestry deposits can be utilized as good resources for biomass briquette gas, and have fantastic prospective for power use; the biomass briquette fuel market in main China, eastern China, southern China, north China as well as northeast China is well created. Develop as well as boost biomass fuel pellet device modern technology as well as briquette gas burning innovation, provide even more rewards and also support policies for briquette gas, develop even more biomass pellet press presentation bases, elevate public understanding of environmental protection and also restrict the unreasonable use coal, etc. Conducive to the development of biomass gas in China, biomass pellet press has excellent market leads. https://preview.redd.it/24bwr7sjlw3b1.jpg?width=1200&format=pjpg&auto=webp&s=e3e3a26d896180055ac3f3c43cb572d9619bcb0f 3. Application of biomass pellet fuel The 2020 Young people Olympic Games will be kept in Lausanne. The Lausanne Youth Olympic Games Organizing Board just recently announced that the main Olympic lantern improved June 17, 2019 used biomass pellet gas as the gas to stir up the torch for the very first time. Applied at global events. The only gas used in the Young people Olympic torch will certainly be biomass pellet gas, which is the very first time in the background of the Olympic Games. It shows the idea of lasting growth, as well as it is additionally a acknowledgment of biomass timber pellet fuel. The international promo of this sustainable fuel has a leading role as well as importance. Biomass pellet gas will certainly stir up the main torch of the Youth Olympic Gamings. Do we have any type of factor to turn down biomass pellet fuel? Biomass pellet gas is a sort of biomass power, which has infinite features. Using biomass pellet gas instead of standard fossil power (coal, oil, natural gas) can reduce the exhaust of greenhouse gas co2 and also reduce the pollution. It has the function of securing our living environment. At the same time, it plays an vital duty in the building and construction of energy safety and security that counts greatly on imported natural gas energy, and also is also in accordance with the advancement concept of extensive reuse of agricultural and also forestry sources. Biomass pellet fuel is the use of seasonal basic materials in rural areas: such as wood, branches, peanut shells, wheat straw, corn stalks, rice husks, sawdust, shavings, etc. The pertinent procedure is refined into 6-10mm strong granular gas. The granular fuel has the qualities of high calorific worth, low ash material, low wetness, high thickness, resistance to burning, and also no black smoke. It is a common environmentally friendly central heating boiler fuel. Environmental benefits can likewise generate financial benefits, and also the reuse of waste is beneficial to the country as well as individuals, and also satisfies the demands of environmental management advancement. The expert mechanical equipment for making biomass pellets is called biomass pellet press device, which can process all sort of flammable biomass resources without including any kind of ingredients via biomass pellet press devices to generate biomass pellet fuel. Biomass pellet gas is making use of seasonal raw materials in backwoods: such as wood, branches, peanut shells, wheat straw, corn stalks, rice husks, sawdust, shavings, and so on. The appropriate procedure is processed into 6-10mm solid granular fuel. The granular fuel has the qualities of high calorific value, reduced ash material, reduced wetness, high thickness, resistance to burning, and no black smoke. It is a common eco-friendly central heating boiler gas. Ecological advantages can likewise create financial benefits, as well as the reuse of waste is beneficial to the country and also the people, and fulfills the requirements of environmental protection development. https://preview.redd.it/yv5kxlmklw3b1.jpg?width=1200&format=pjpg&auto=webp&s=d6888bdbb49871b387af2355f67f9d6d68bf0d8e Related post: Biomass Pellet Production Line 4. Concerns concerning biomass pellet press The prop of the biomass granulator utilizes a live head and also a online pole to lower the fixing expense and make the manufacturing more convenient. In regards to devices upkeep, the oil-coated lubrication is transformed to oil-immersed lubrication, which prolongs the life span of the biomass pellet press equipment. Many individuals are usually bothered by the poor molding effect or the unattainable outcome when making use of the biomass pellet press equipment. Currently the pellet equipment producer introduces some expertise on this issue: The major factors that identify the form of the biomass pellet press are the size and also moisture of the wood chips. These two factors are critical. Typically, we need that the size of wood chips need to not be larger than two-thirds of the diameter of the pellets processed by the biomass pellet device, which is about 5-6mm. Power saving, environmental protection, as well as environment-friendly life are the stylish motifs of today's culture, and also the biomass pellet press is a tool that reacts to this idea. It utilizes rural corn stalks, corn cob, leaves as well as various other crops to develop a new type of non-polluting gas, which is a second use it. If the size is also big, the time of the raw product in the granulating chamber will certainly be prolonged, which directly influences the output, as well as if the raw product is as well large, it needs to be crushed in the powdering chamber before getting in the hole of the abrasive device, to ensure that the mold is pressed. Boosted wheel wear. The biomass pellet press calls for that the moisture material of wood chips is generally between 10% and also 15%. If the water is as well big, the surface of the processed pellets is not smooth as well as has fractures. Regardless of how much water is present, it will not be developed directly. If the moisture is also small, the powder output price of the biomass pellet maker is high or the pellets are not directly generated. Founded in 1995, Richi Equipment has been creating steadily and steadily in the field of pellet processing as well as biomass pellet mill offer for sale. It is primarily engaged in the R&D and production of devices required for industry projects such as feed, biomass power, and natural fertilizer. It has actually slowly developed a full R&D, production, sales as well as service system, provide technological services and also sustaining items. submitted by Carmen-Huang to pelletmachinery [link] [comments] |
2023.06.04 03:17 Millakilla2A [WTS] Colt Upper Receiver, Criterion CORE 10.5, Centurion Mk12 GB, FCD RHF
Timestamp:
https://imgur.com/a/X5tgBfZ Pics:
https://imgur.com/a/OeJxuAY Catch and release. Under 300rnds total on this set up. Prices are shipped. Obo. Comment here and then PM. No chats.
Will assemble this upper if someone wants it complete. $475 w/ A2 birdcage, $490 w/ Stag 3g comp. Colt keyhole assembled reciever. Light salt. $100 SOLD SOLD SOLD
Criterion CORE 10.5. Light salt. $230
FCD RHF 9.5" Handguard. Some salt. $140
Centurion mk12 .625 gas block and unknown nitride tube. Some salt. Super low profile w/ single set screw. $50
submitted by
Millakilla2A to
GunAccessoriesForSale [link] [comments]
2023.06.04 03:14 Matt_matrix2 [WTS] Dead Air 5.56 Muzzle break, G19.3 DPM Recoil reduction kit, Kak 11.5” 5.56 Carbine barrel NiB, P365 Grip module
Timestamp:
https://imgur.com/a/yWSRmXp Ill attempt to get any sold stuffs shipped while im at work tomorrow if it times out, if not Monday morning...
NiB Dead Air 1/2-28 (5.56) Muzzle break - DA101-
$64 Shipped Insured G19 gen3 DPM Recoil reduction kit -
$69 Shipped Insured Used for approx. 500 rounds. It Worked fine.
Kak Value line 11.5” 5.56 Carbine Gas Barrel - NiB –
Price Drop $84 Shipped Insured New in packaging, unused, unmounted, mildly molested… will throw in the spare CAR hand guards for $5.
P365x grip module -
$20 Shipped used without packaging. Came with my P365.
Payment PayPal G&S or F&F - Buyers choice.
submitted by
Matt_matrix2 to
GunAccessoriesForSale [link] [comments]
2023.06.04 02:52 TheBlueBeans Looking at two mavericks at dealer tomorrow.
I’m trying to find the very standard XLs with a hybrid engine. This dealer has one hybrid and one ecoboost.
Honestly, as much as I want the hybrid for work purposes (I have to drive an hour and a half to work every day), how different is the gas mileage really? Is it worth getting an ecoboost over a hybrid if the hybrid doesn’t work out for some reason?
Also, any tips for lowering the price would be super helpful. All the dealers near me mark up the truck about $4000ish.
submitted by
TheBlueBeans to
FordMaverickTruck [link] [comments]
2023.06.04 02:37 thatgymdude Best Pickup Truck For Me, 100k Max Budget.
Hello Everyone,
I am in need of a pickup truck to replace my 4Runner as I have two jetskis and am looking to get a UTV and need to tow it (roughly 7500lbs max). I am not sure if I should go to a to a 1/2 ton or a 3/4 ton. I have a paid off 4Runner TRD Pro I am selling. I am willing to finance or lease depending on which is better for a new pickup based upon reliability .
Requirements:
- Ride needs to be as comfortable as possible since I will be doing 4 hr+ drives to Moab/Lake Tahoe with a trailer alot. I also live by lakes locally and during the Summer-Fall I constantly will be towing as I am a big fan of offroading and going to the lake. I really am sick of tire roar in my 4Runner and it makes my ears ring on long drives.
- Bed can fit appliances as I am going through a remodel and am sick of renting pickups. I didnt realize how often I needed to use a bed of a truck.
- Least annoying driver's infotainment to use.
- Most reliable of the domestic brands (I used to be a Toyota fan but I drove the new Tundra and hated it both in looks and ride quality so I am ditching them for good)
- Capable of handling a dirt and gravel road (I noticed alot of top trim trucks have 21-22in. rims. which makes me question if you can take them offroad at all).
- Nice enough to daily when I am not driving our SUV (BMW x7). My wife often uses it so I dont want to be stuck without a car and I want to buy something purely for me to use. She absoutely despises pickups and asked me a bunch of times to not get one, but I have learned SUVs just suck for towing large weight, she can drive that and leave me be.
- Least punishing dealership experience for servicing, again Toyota here is awful for this, its so bad I go to a Lexus dealer for oil changes, brake jobs and diff fluids just so I wont have to deal with the insane backlog.
- Durable enough to handle salt on roads without rotting out and capable of being left outside in snow without ruining the paint.
- Must have at least a v8 if its a gasoline engine, my 4Runner has a v6 and its so slow. (I am not opposed to diesel either if they are reliable)
Budget: 100k max
No Brand Loyalty (used to be Toyota but the hybrid v6 utterly put me off and the interior I did not like, especially the tablet.
No EV trucks, my neighbor had a Rivian R1T and already dumped it when he tried towing with it and shared with me his experience, I dont want to learn the same lesson he did. Plus I refuse to own anything without Apple Carplay.
I give zero shits about fuel economy as long as its not under 10mpg and can take costco premium without knocking if its gasoline.
What I have checked out so far.
Toyota Tundra Capstone: Ugly looks, annoying tablet, awful ride that actually made me feel carsick, laggy powertain that doesnt save really much gas, and why white leather in a truck?! The dealer tried to offer me an allocation on a TRD Pro like my 4Runner with 20k markup! I told him to get lost.
GMC Sierra Denali Ultimate: Loved the interior, it rode almost as nice as our SUV, not sure however if its reliable or can go offroad with the 21inch. rims. The supercruise is amazing but they told me 7-9 months with all the options I wanted so I walked out (I just wanted the supercruise) and they tried panic calling me a few times, they STILL are blowing up my phone even a week after hounding me.
Ford F150 Raptor: Tire roar was unbearably loud at highway speeds even worse than my modded 4Runner and the markup was unpleasant. They have even less inventory, just v6 F150s in low trims so I bailed on them too. Again same as the GMC dealers they are phone pests. I didnt even get to try the super duties because they didnt let me drive one and said a v6 F150 is enough (basically trying to force me to buy something on the lot), sorry I want something better If I am willing to pay that.
I am not sure where I should go from here honestly, I am not very knowledgable about trucks, I liked the idea of the 2024 GMC 2500 HD AT4 as well, but all the GMC dealers here are connected and have the most miserable inventories. They have used current gen HD 2500/3500 trucks, but their interiors just dont match up to price they are asking, they remind me of Tahoes in the worst way.
I was thinking that the offroad variants with more sidewall would be a better ride, but I am not sure when it comes to trucks and could use some more info on this. I heard good things about Ram minus their reliability. Where I live pretty much everyone has a top trim GMC Sierra/2550 or Ford SuperDuty as their hauler because they always are towing horse trailers or boats. What would you all reccomend?
Thanks!
submitted by
thatgymdude to
whatcarshouldIbuy [link] [comments]
2023.06.04 01:59 snackerjoe Help me decide between the blackstone 36 from walmart or the camp chef FTG 600
So I have decided between the blackstone 36(new model from walmart) or the campchef FTG 600 (the older model, not the new one that can't be converted into a grill)
Originally I was dead set on the Camp Chef FTG 600 (build quality, even heating, wind guard) but I would need to buy a hardcover for ~100 dollars.
I see lots of people praising Campchef saying it is superior to Blackstone but I wonder if the people saying that are comparing it to the older blackstone models. The newer Blackstones (Model # 2177 at walmart) comes with an omnivore? griddle.
It has wind guards and more secure bolting in place to prevent warping of the griddle. Having the windguards in place makes it heat more evenly and more energy efficient. (This is why I took Member Marks' griddle Models out of the running, their griddles have no support. griddle with no support == easily warped).
The campchef model hasn't updated itself in a few years, but it looks like Blackstone is continually innovating while staying price competitive.
My question is, given this information about the new blackstone griddle with this omnivore griddle, is the old CAMP Chef FTG 600 worth the extra $240+ tax?
I don't really care about the gas grilling component of the CCFTG600, it's just a nice to have.
Hoping somebody who has had both can chime in.
Thank you!
Model | Camp Chef FTG 600 | Blackstone 36 4 burner |
Price | $440 | 300 |
Windguard? | Yes | Yes |
Hard cover? | Additional $100 | Included |
Cooking Area | 602 sq in | 756 sq in |
Grease Trap? | Front ( small hole gets clogged. Pulling oil to you can cause splattering) | Back (Annoying to get to if place near wall, lid hits grease pan handle) |
Total cost | $540 | $300 |
submitted by
snackerjoe to
griddling [link] [comments]
2023.06.04 01:22 TheRealPedram 2016 Sonata Sport has to go. What next?
I’ve got a 2016 Hyundai Sonata Sport and it’s currently at 116,000 miles and the engine is burning oil like crazy. However, I have it in immaculate shape and once the car is filled with high octane gas and fresh oil too off, the knocking goes away and runs smooth until another 700 miles.
I like my Sonaya so much as it looks very good for the price and it’s very comfortable. However, I just do not want to even bother with the engine going bust, it looks very close now.
I’m on a tight budget so anything above $20k is a no go. It’ll be a car for the next two years only whatever I buy next.
Up and coming entrepreneur and money is starting to come in fast!
What I need: -Reliable, don’t want to worry about my engine shitting out on me -Comfortable, I love how the materials in my sonata feel compared to a similar mode toyota that is just trash plastic -Look good, so no camry or corolla. I want a. good looking car -Strictly no SUV or CUV
So far have an offer of $12k for the sonata . Was thinking of getting a clean low mileage 2012 Lexus ES
What do you think?
submitted by
TheRealPedram to
whatcarshouldIbuy [link] [comments]
2023.06.04 00:44 cbvv1992 🔥47% Price Drop – $399.99 Royal Gourmet 6 BBQ Liquid Propane Gas Grill!!